EA5801E-GP08

Leave a Comment / Optical Access, Optical Networking

OptiXaccess EA5801E-GP08

A compact box-shaped OLT.

OptiXaccess EA5801E-GP08

The OptiXaccess EA5801E-GP08 Optical Line Terminal (OLT) provides Gigabyte Passive Optical Networks (GPON) access, and supports Fiber To The Home (FTTH), Fiber To The Office (FTTO), and Fiber To The Machine (FTTM) solutions. It carries all services over one fiber network, simplifying network architecture and reducing Operating Expenditure (OPEX).

Lightweight and Small



The lightweight OLT weighs less than 5 kg and occupies 1 U installation space. It can be flexibly adapted to various scenarios.

High Reliability



Supports dual Alternating Current (AC) or Direct Current (DC) power supplies, providing flexible power supply and high reliability

Easy Installation and Flexible Deployment

The matching small outdoor cabinet can be installed on a pole, tower, or wall, enabling easy and convenient installation and reducing engineering costs

Specifications

arametersHuawei OptiXaccess EA5801E-GP08
Dimensions (H x W x D)Excluding mounting ears: 43.6 x 442 x 220 mm
Including IEC Mounting Ears: 43.6 x 482.6 x 220 mm
Including ETSI mounting ears: 43.6 x 535 x 220 mm
Maximum Fully-loaded Weight (DC)5 kg
Power Supply ModeDC power supply (dual backup)
AC power supply (dual backup)
Working Voltage RangeDC power supply: –38.4 V to –72 V
AC power supply: 100–240 V
Rated VoltageDC power supply: –48 V/–60 V
AC power supply: 110 V/220 V
Maximum Input CurrentDC power supply: 6 A
AC power supply: 2.5 A
Ambient Temperature–40°C to +65°C
The device can start up at a lowest temperature of –25°C.

Note:
The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient Humidity5%–95% RH
Atmospheric Pressure70–106 kPa
AltitudeBelow 4000 m

Note:
The air density varies with the altitude and will affect the heat dissipation of a device, so the working environment temperature of the device varies with the altitude.
System Switching Capacity
Below 4000 m

Note:
The air density varies with the altitude, which affects the heat dissipation capability of devices, so the operating temperature of the device changes with the altitude.
MAC Addresses32768
Access ONT256
IPv4 Routing Table8192
IPv6 Routing Table4096
ARP Table16384
Bit Error Rate (BER) in Full LoadA BER smaller than 10 e-10 for a port that transmits data in full load
10 GE/GE upstream ports4
Service ports8 GPON
Power ConsumptionStatic Power Consumption:
DC power supply: 50 W
AC power supply: 51 W
Typical Power Consumption:
DC power supply: 85 W
AC power supply: 88 W
Maximum Power Consumption:
DC power supply: 90 W
AC power supply: 94 W

Note:
The power consumption of the device is calculated based on the following conditions:
Static power consumption: 25°C, no optical module in any optical port, and no service running.
Typical power consumption: 25°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.
Maximum power consumption: 50°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.

Leave a Comment